Hole Cutters for Construction Use
|
Materials
Cut |
Available
Sizes |
Tools
|
Tasks/Project
|
|
|---|---|---|---|---|
|
HVAC Electrical Plumbing Refrigeration Insulation Central Vacuum Carpentry MRO |
Wood, plywood, OSB, MDF, chipboard, Hardie cement board, Durock, fiberglass, clay roof tile, brick veneer, wall tile, marble | 5/8" to 6-1/4" 2-1/4 " max cut depth 2-5/8, 3-5/8, 4-5/8 " sizes for ABS, EMT Use 5/8 "-18 arbor or Hole Pro XL-Arbor with Hole Pro Shield |
Blue Boar TCT Universal hole cutters Blue Boar TCT Self-Feed tungsten carbide tipped hole cutters |
Service feeds, vent and flue pipes, service pipe, electrical circuit runs, central vacuum |
| HVAC Electrical Plumbing Refrigeration Insulation Radon Removal |
Stucco, plaster, brick siding, fiber cement board, and plywood sheathing | 1 " to 6-1/4 " diameter and 2-5/8 ", 3-5/8 ", 4-5/8 " sizes for ABS, PVC, EMT pipe 2 " max cut depth 7/16 " 3-flat shank |
Blue Boar TCT tungsten carbide tipped Stucco-Wood hole cutters | Service feeds for plumbing, HVAC electrical, soffit vents, ABS/PVC holes for HVAC and split AC systems, heat pumps, tankless water heater vent Radon removal |
| HVAC Electrical Plumbing Refrigeration Radon Removal |
Concrete cinder block and brick | 1 " to 6 " diameter and 2-5/8 ", 3-5/8 " sizes for ABS, PVC, and EMT pipe 10 " cutting depth 5/8 "-11 threading |
Blue Boar Dry Cutting Diamond Core bits Laser Welded cutting segments for use on core drills and even high RPM 7 " right angle grinders |
Service feeds for plumbing, HVAC electrical, dryer vents, tankless water heater vents, Radon removal |
| HVAC Electrical Audio CCTV/security Refrigeration Plumbing Radon Removal Carpentry Woodworking MRO |
Sheetrock, plaster, hard and soft woods, Hardie cement board, plywood, OSB, MDF, chipboard, Durock, fiberglass, acrylic sheet & plastics, veneers, Formica | 1-7/8 " to 17 " holes Infinite adjustment 1-1/8 " max cut depth Tungsten blades for sheetrock/plaster, etc HSS blades for T&G plywood, plastics |
Hole Pro X-models Adjustable hole cutter kits X-148 1-7/8 " to 5-7/8 " X-230 1-7/8 " to 9 " X-305 1-7/8 " to 12 " X-425 1-7/8 " to 17 " |
Recessed light cans, in-ceiling audio speakers, HVAC duct/vents? CCTV, CO2 monitors, Radon removal,? tankless water heater vents,? exhaust fans |
| Roofing Skylights |
Sheetrock, Plaster, acoustic tile, wood, acrylic sheet and plastics, MDF, plywood, chipboard, veneers | 1-7/8 " up to 17 " diameter holes Covers 10 " to 16 " cutouts in drywall & plaster - less risk of cracking plaster |
Hole Pro X-425 adjustable hole cutter | Tubular skylights |