Drill Press Hole Cutter Models

Drill Press Model Hole Cutter

Cutting thickness - 1" (25mm)
** 2" when can be cut from both sides.

Uses 3/8" shank

User replaceable blades


Which Model to choose?


For general use where holes of different diameters are made in succession the HH, HT and HHT models are quick to adjust with their hand tightened blade holders.

For high volume production environments where hundreds of holes need to be made at exactly the same diameter, we recommend the
Twin Blade X-Model hole cutters which have thicker measure bars and a blade holder that is tightened around the bar using a hex wrench. The
X-model hole cutters will not loosen or shift even with hundreds of holes or when cutting laminates where there is greater vibration of the tool. The X-model hole cutters can be used with or without their shield in a drill press. The shields minimize dust in the shop and protect the operator without interfering with the use of the tool.

HolePro in UseHH, HT and HHT Drill press model kits (light-weight use) include:


Model

Size

Buy Online

HH-200

  • Cuts holes 1-5/8" to 8"
  • Cutting thickness - 1" (25mm)
    ** 2" when can be cut from both sides.
  • HSS blade set
  • Hex wrenches
  • Sturdy plastic carry case

Buy Online

HH-300

  • Cuts holes 1-5/8" to 12"
  • Cutting thickness - 1" (25mm)
    ** 2" when can be cut from both sides.
  • HSS blade set
  • Hex wrenches

Buy Online

HT-200

  • Cuts holes 1-5/8" to 8"
  • Cutting thickness - 1" (25mm)
    ** 2" when can be cut from both sides.
  • Tungsten carbide blade set
  • Hex wrenches
  • Sturdy plastic carry case

Buy Online

HHT-200

  • Cuts holes 1-5/8" to 8"
  • Cutting thickness - 1" (25mm)
    ** 2" when can be cut from both sides.
  • HSS blade set & Tungsten carbide blade Set
  • Brad point and High Speed Steel pilot drill as well as a chisel point bit for thin materials
  • Hex wrenches
  • Sturdy plastic carry case

Buy Online

User Replaceable Blades for Twin Blade Models

Model

Description

Buy Online

BH-002

High Speed Steel (HSS)

  • HH-200, HH-300, HHT-200, X-148, X-230, X-230+, X-305, X-425
  • Cuts wood, melamine, acrylic sheet, soft acoustic tile and most plastics

Buy Online

BT-002

Tungsten Carbide

  • HT-200, HHT-200, X-148, X-230, X-230+, X-305, X-425
  • Cuts sheetrock, MDF, plaster, plywood, fiberglass, Hardi fiber-cement board, & similar materials

Buy Online